180° rotary cycle:
1,800 – 2,000 mm
120° rotary cycle:
1,500 – 2,000 mm
Outside diameter minus 100 mm
Upper part of the body:
Metal cladded side panels with steel or stainless steel sub-structure, alternatively with glazing (see below).
Safety strips on opposite shearing edges.
Top dust-proof cover made of raw aluminium plate.
Two maintenance openings in the lower ceiling plate (outer opening can be locked by means of customer’s profile half cylinder).
Powder coated in an RAL colour selected by the ordering party.
The security revolving door is equipped with a position control drive PR-1 for automatic access control and an active holding brake. Through a release impulse for the entry or exit direction, the selected rotation direction is released. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the revolving door within an adjustable period of time, the release is cancelled. The sensors installed in the ceiling monitors the intermediate sector and detects any unauthorised passage from the opposite direction. The authorised person can pass through, the unauthorised person is sent back. Bi-directional access control (for 180° rotary cycle) guarantees high capacity. The behaviour of the security revolving door in the event of a power failure can be freely selected. Standard adjustment: Locked by the end point locking with 5,000 Nm. It is not possible for people to get trapped or stuck thanks to the patented end point locking. Two emergency off switches (one inside and one outside) are installed in the corner profiles. If night-time closure is available, mounted on separate supporting columns or on the night-time closure leaf.
Control unit is integrated into the unit.
Power supply 110 – 230V AC 50/60 Hz.
For further on-site processing, three freely programmable floating contacts are available.
The security revolving door is mounted on finished floor level FFL.
pasaj de trecere pe stânga/dreapta coloanei rotative opritoare
diametrul exterior 1520mm…2020mm
modificarea înălțimii pasajului de trecere, max 2800 mm
modificarea înălțimii acoperișului: max 900 mm
acoperiș de protecție la ploaie cu sistem de drenare și diferite modalități de etanșare a elementelor porții
structură rezistentă la foc
panouri glisante exterioare pe timp de noapte (metalice sau din sticlă de 8 mm)
diferite tipuri de mânere pentru manevrarea aripilor ușii
diferite tipuri de pardoseli pentru podeaua pasajului de trecere
părțile metalice din inox finisat satinat sau lucios
automatizarea ușii rotative cu senzori de prezență/mișcare montați în tavanul pasajului de trecere sau în unghiul interior al aripilor elementului rotativ
covor cu senzori de greutate pe podeaua pasajului de trecere; în cazul depășirii greutății programate, sistemul de control refuză trecerea persoanei și o forțează să revină de unde a intrat prin rotirea elementului central în sens invers (până în poziția inițială)
spoturi de lumină cu LED-uri în tavanul pasajului de trecere
pornire automată a rotației elementului opritor (în una/ambele direcții)
panou de operare OPL 05
diferite tipuri de console pentru montarea cititoarelor de card
Passage side inwards right/left.
In the event of a power failure
Can be freely rotated in entry and exit direction.
Automatic start in a direction/twoo directions
After reader signal or continuous release. Start impulse through sensor that is installed for 120° doors in the corner post or for 180° doors in the ceiling plate / After reader signal or continuous release. Start impulse through sensor that is installed for 120° doors in the corner post or for 180° doors in the ceiling plate..
Increase in headroom (different dimensions)
Increase upper part of body (different dimensions)
Increase body panel
Up to max. 200 mm via upper part of the body (used inside).
Underfloor suspension drive
For mounting on the bare ceiling.
Cover of the outer half of the body made of light metal,
total height + 16 mm.
Collection pan with two spouts
On the outer half of the body made of light metal, total height + 50 mm.
The plates are powder-coated in RAL 9006 for stainless steel units.
Glass side walls without upper base
Glass elements in the upper part of the body.
Two plates affixed on door leaf, price per leaf.
Recommended for small diameters.
Different floor element
Powder-coated in RAL / Semi-gloss finish/ Finish with natural colour anodised C0
Different types of consoles
Push button in stainless steel console
For manual single release, attached to the inner corner post or round body.
Push button on flat surface
For manual individual release, attached to the inner corner post or round body. Integrated in flat surface and thus protected against vandalism.
OPL 01 operating panel with additional board
For installation in flush-mounted socket with single grey installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
Signal device in stainless steel console
Made of 2 lights each red/green, with alternating function, attached to round body or corner post outside and inside.
Already included in the standard for revolving doors with 180° rotary cycle!
Signal device on flat surface
Consists of 2 lights each red/green, with alternating function, integrated in flat surface inside and outside, e.g. in the wall connection.
Emergency stop switch with seal cap
Instead of available emergency stop switch. Installation in console 4 or 5 or installation in a supporting column in the entrance area of the door.
Protective ring/protective ring not possible around the switch!
Mounted on the body panel. For additional safety of groups of people requiring special protection. The drive reduces the rotary motion of the rotating unit to positioning speed once a person enters the danger area.
Maximum headroom = 2,800 mm. See also risk assessment 30562.
Not possible to attach a reader or button on the corner post!
Optical monitoring locking segment
Intermediate sector monitoring through additional SRD Vision sensor for 120° or 180°. Only possible for one or two directions in combination with SRD Vision!
Documents: IBR 32057
Weight monitoring rotating unit
The weight of a second person passing through is detected, the door is stopped and reversed. Installation dimensions in the floor: Ø 200 mm, depth 90 mm.
Conduit required for laying cables in the floor.
Scales with one weight limit
Weighing platform for bi-directional recording including rotating unit monitoring. If the maximum set weight limitation is exceeded, the person is sent back. Includes floor element measurement X = 90 mm with stainless steel plate insert.
For 180° rotary cycle recording in only one direction.
Lighting by 2/3/4 LED spots
1,65 W, installed in intermediate ceiling.
Delivery Time (standard): 45 working days