Portal and housing made of steel. Lockable maintenance openings made of aluminium.
120° rotating unit: Ø 89 mm tubular column each with 13 Ø 40 mm bar-shaped crossbars made of electrolytic polished stainless steel with black plastic covering caps.
Curved blocking element and passage limitation with filled steel rods with saw-through protection.
The contractor supplies an auditable static calculation (load: 1.0 kN/m) with foundation information. Manufacturer qualification specifications according to DIN 18800-7.
Connection available for earth strip provided by the customer on both portal posts.
Unit corresponds to resistance class WK 2 in accordance with DIN V ENV 1627.
– Hot-dip galvanised portal, housing, passage limitation and blocking element.
– Maintenance opening plastic coated in RAL 9006
– Stainless steel glossy rotating unit
□ Aggregate type 2
The turnstile is equipped with a 1.6 joule limited low energy SK-M servo positioning drive for automatic access control and active locking. The selected rotation direction is released for a rotary cycle by a floating signal initiated by the customer in the direction of entry or exit. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the turnstile within an adjustable period of time, the release is cancelled. The behaviour of the end point locking in the event of a power failure can be freely selected. Standard setting: blocked in entry direction, free rotation in exit direction. It is not possible for people to get jammed or stuck thanks to the patented end point locking.
Personal safety through patented end point locking:
Following a release, the turnstile can be stopped and rotated back at any time up to half way through the rotary motion. This prevents trapping of body parts and carried objects. Once the turnstile has completed half of its rotary motion, the unit can only be exited in the released direction.
MCBF (mean cycles between failure) is 4 million.
The network-compatible CAN bus control unit is integrated into the unit. Power supply 100–240 VAC 50/60 Hz 253 VA. Four floating inputs for on-site control and five floating outputs for further processing.
Floor fixing on finished floor level FFL.
Passage side inwards right / Passage side inwards left.
(Applies to all roof versions: One continuous roof is supplied for multiple units. Width is adjusted to the total width of the multiple unit.)
Fitted on top of the unit to prevent people from climbing over and to protect against weather conditions. Steel substructure hot-dip galvanised, trapezoid plate cover in RAL 9002.
Plastic coated finish in RAL
Steel parts and maintenance openings also plastic coated in RAL.
Different kinds of consoles for contactless readers.
Two piece (each 55 W), installed in housing, incl. thermostat, incl. isolation of
the housing for operating within -20°C and -50°C.
Control desk OPL05
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
Floor fixing for sub floor level SFL measurement X = 150 mm.
Delivery Time (standard): 30 working days
Delivery Time (with options): 35 working days