Produse
Turnstile with Integrated Door Kaba Kentaur FTS-M05
Manufacturer: KABA Gallenschutz
Country of origin: Germania
Website: http://www.kaba.com/physical-access-systems/
Product code: Kaba FTS-M05
-
Standard measurements:
Portal width:
1940 mm
Rotating unit passage width:
560 mm
Headroom:
2060 mm
Total height:
2270 mm
Integrated door without emergency route passage width:
1120 mm
Construction:
Portal and housing made of steelLockable maintenance flaps made of aluminium.
180° rotating unit: Ø 89 mm tubular column each with 11 Ø 40 mm bar-shaped crossbars in glossy AISI 304 stainless steel with black plastic cover caps.
Passage limitation with filled steel rods.
The contractor supplies an auditable static calculation (load: 1.0 kN/m) with foundation information. Manufacturer qualification specifications according to DIN 18800-7.
Connection available for earth strip provided by the customer on both portal posts.
□ Integrated door without escape function, without drive
Integrated door as barrier element with 10 Ø 42 mm straight crossbars and circumferential frame with filled steel rods, equipped with double-sided knob and spring bolt lock pre-set for profile cylinder selected by the customer.
alternatively
□ Integrated door without escape function, with drive
Integrated door as barrier element with 10 Ø 42 mm straight crossbars and circumferential frame with filled steel rods, equipped with double-sided knob and spring bolt lock pre-set for profile cylinder selected by the customer incl. drive for integrated door and sensor bar for protection.
alternatively
□ Integrated door with escape function, without drive
Blocking element with 10 straight Ø 42 mm crossbars and all-round frame with filled steel rods, equipped with double-sided knob and emergency release lock pre-set for profile cylinder selected by the customer.
(For these units, the customer must apply for approval from the highest building supervisory board. Building law is regulated at state level in Germany which means that regulations may vary from state to state.)
alternatively
□ Integrated door with escape function, with drive
Integrated door as blocking element with 10 Ø 42 mm bar-shaped crossbars and all-round frame with filled steel rods, equipped with double-sided knob and spring bolt lock pre-set for profile cylinder selected by the customer. Incl. electric escape door opener (currentless open) and drive for integrated door and sensor bar for protection.
(For these units, the customer must apply for approval from the highest building supervisory board. Building law is regulated at state level in Germany which means that regulations may vary from state to state.)
Function:
□ Aggregate type 0The movement of the rotating unit is manual; the rotating unit is (mechanically) freely rotatable in exit direction, the entry direction is blocked. No electronic control takes place.
(only for FTS-M03 and without emergency route function)
alternatively
□ Aggregate type 2
The turnstile is equipped with a 1.6 joule limited low force SK-M servo positioning drive for automatic access control and active locking. The selected rotation direction is released for one rotary cycle by a floating signal initiated by the customer in the direction of entry or exit. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the turnstile within an adjustable period of time, the release is cancelled. The behaviour of the end point locking in the event of a power failure can be freely selected. Standard setting: blocked in entry direction, free rotation in exit direction. It is not possible for people to get jammed or stuck thanks to the patented end point locking. The rotating unit turns 90° in the direction of passage when the swing door opens.
Personal safety through patented end point locking:
Following a release, the turnstile can be stopped and rotated back at any time up to half way through the rotary motion. This prevents trapping of body parts and carried objects. Once the turnstile has completed half of its rotary motion, the unit can only be exited in the released direction.
MCBF (mean cycles between failure) is 4 million.
Electrical system:
The network-compatible CAN bus control unit is integrated into the unit. Power supply 100–240 VAC 50/60 Hz 253 VA. Four floating inputs for on-site control and five floating outputs for further on-site processing.Installation:
FFL floor level fixing.
Options
Counting of the persons passing through the gate in a single direction
Coin operation system
Roof
(Applies to all roof versions: One continuous roof is supplied for multiple units. Width is adjusted to the total width of the multiple unit.)Fitted on top of the unit to prevent people from climbing over and to protect against weather conditions. Steel substructure hot-dip galvanised, trapezoid plate cover in RAL 9002.
Different dimensions
Finish
Plastic coated finish in RAL
Steel parts and maintenance openings also plastic coated in RAL.Console
Different kinds of consoles for contactless readers.
LED arrow-cross signal device
Red/green pictogram (Ø 90 mm) installed on both sides in the maintenance opening, intensive luminosity.Heating
Two piece (each 55 W), installed in housing, incl. thermostat, incl. isolation of
the housing for operating within -20°C and -50°C
Control desk OPL05
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
LED lighting
For installation with /without a roof. Depending on a lamp for indoor and outdoor. Luminaire each fastened with housing at Kentaur portal , including weather protection. Voltage: 230 VAC, housing: IP65
Installation
Floor fixing for sub floor level SFL measurement X = 150 mm.
Delivery Time (standard): 20 working days
Delivery Time (with options): 35 working days