Produse
Sensor passage Kaba Argus HSG-E01
Manufacturer: KABA Gallenschutz
Country of origin: Germania
Website: http://www.kaba.com/physical-access-systems/
Product code: Kaba HSG-E01
-
Standard measurements:
Total width:
1240 mm
Passage width:
600 mm
Interlock height:
1020 mm
Interlock length:
2050 mm
Design:
The housing and the semi-round side column made of AISI 304 stainless steel. Two Door leaves are made of TSG glass, thickness 10 mm, upper edge 1,200 mm.
To improve personal safety, standards and guidelines relating to points where body parts could get pinched or squashed have been taken into account in the development of the sensor barrier (Machinery Directive 2006/42/EC).
Finish:
Stainless steel semi-gloss smooth finish.
Function:
Aggregate type 2
The door leaves automatically move laterally into the housing. The sensor barrier is equipped with two servo positioning drives (low energy drives with energy content
Protection device: The motion area of the blocking elements is monitored by light grids.
In the event of a power failure, the door leaves are moved to the open position through an impulse from the capacitor. The normal operating mode can be optionally continued via an uninterruptible power supply (USP) with battery pack. Automatic reset upon resumption of power supply – the unit resets to its regular function without manual intervention The access area is secured immediately upon resumption of power supply. In basic position, the unit is unlocked to minimise power consumption. Parameters can be set for unit behaviour and each specific customer (e.g. starting behaviour and passage speed).
Available operating modes:
Open basic mode:
The door leaves close automatically if someone passes through who is not authorised. If an authorised individual passes through, the door leaves stay open.
Closed basic mode:
The door leaves open automatically if the individual is authorised in the direction of passage and then close again.
If passage is authorised, it is not possible for someone without authorisation to pass through from the opposite direction. If no one passes through the unit within an adjustable time after the release signal, the release is automatically deleted. In the event of a power failure, the blocking elements are opened using the battery pack.
MCBF (mean cycles between failure) is 2.5 million.
Electrical system:
control unit and power supply unit are integrated into the unit.
Power supply 110 – 230V AC 50/60 Hz.
Installation:
The sensor barrier is dowelled at finished floor level FFL and is not suitable for outdoor installation.
Options:
Version as single, double, triple, quadruple, quintuple, sextuple, septuple or octuple unit
Base column
For the installation preparation of components provided by the customer or for installations by Kaba, e.g. reader, emergency button.
Passage width:
900 mm
LED arrow-cross signal device
Red/green pictogram (Ø 90 mm) installed on both sides in the cover plate (flat surface). Intensive luminosity! No other components possible!
Operating panel OPL05
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
Delivery Time (standard): 30 working days