Upper part of the body:
The side body parts are designed with LSG 8 mm glass panels and connected with one another in the area of the centre post. Electrical and mechanical components are integrated into the upper part of the body. The upper dustproof cover is made from raw aluminium plating. Two maintenance openings are integrated into the lower ceiling plate; the outer maintenance opening can be locked, designed for Euro profile half cylinders of the customer. 120° rotating unit: tubular column, Ø 89 mm, each with 7 U-shaped crossbars, made of glossy stainless steel AISI 304. The blocking element on the side wall is made of rectangular aluminium profiles.
Two maintenance openings are integrated into the lower ceiling plate; the outer maintenance opening can be locked, designed for KABA round profile half cylinders of the customer.
Plastic coated in an RAL colour or anodised natural tone.
The security revolving door is equipped with a 1.6 joule limited low energy SK-M servo positioning drive for automatic access control and active locking. The selected rotation direction is released for a rotary cycle by a floating signal initiated by an on-site element (or one supplied by the customer). The selected rotation direction is released by a release impulse for the entry or exit direction. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the security revolving door within an adjustable period of time, the release is cancelled. The behaviour of the end point locking in the event of a power failure can be freely selected. Standard setting: blocked in entry direction, free rotation in exit direction. It is not possible for people to get jammed or stuck thanks to the patented end point locking.
The network-compatible CAN bus control unit is integrated into the unit. Power supply 100–240 VAC 50/60 Hz 253 VA. Four floating inputs for on-site control and five floating outputs for further on-site processing.
The security revolving door is mounted on finished floor level FFL.
Passage side inwards right/left.
Entry blocked, exit direction blocked/ Entry direction free, exit direction free./ Entry direction free, exit direction.
Wall connection 200
Both sides and at the top, width 200 mm, clamping strength 24 mm.
one piece, cover of inner and outer body half in aluminium, total height
+ 16 mm.
Powder-coated in RAL
Finish with natural colour anodised C0 and C31-35 (E6)
Body finish semi-gloss stainless steel
Rotating unit acrylic glass
With rotating unit with bar-shaped crossbars made of stainless steel.
Different types of consoles
Push button in stainless steel console
For manual individual release, attached to the inner corner post or round body.
Control desk OPL05
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
Signal device in stainless steel console
Made of 2 lights each red/green, with alternating function, attached to round body or corner post outside and inside.
Lighting by 2 LED spots
1,65 W, installed in intermediate ceiling.
Delivery Time (standard): 27 working days
Delivery Time (with options): 35 working days