Tubular column made of Ø 140 mm AISI 304 stainless steel with 10 mm TSG high glass element with hand rail. The locking, drive and tooth clutch are built into the tubular column. To improve personal safety, standards and guidelines relating to points where body parts could get pinched or squashed have been taken into account in the development of the swing door (Machinery Directive 2006/42/EC).
The swing door is equipped with a servo positioning drive (low energy drive with energy content
Since the drive and the locking devices are mechanically separated, low energy drives can be used to provide personal protection. On the other hand, high locking forces can be used to prevent unauthorised passage through the unit. Parameters can be set for unit behaviour and each specific customer.
MCBF (mean cycles between failure) is 2 million.
The control system is in the external control box H = 283 mm / W = 168 mm / D = 115 mm. Power supply 100–240 V 50/60 Hz. Maximal cable length: 50 m.
Three floating messages (closer and opener) for type 2: Rotation message entry, rotation message exit, message ready.
The swing door is dowelled at finished floor level FFL and is not suitable for outdoor installation.
Special passage width
Leaf radius: 650mm-999mm
Leaf radius: 1000mm
Half-height barrier element at450mm
For connecting two units as double swing door.
OPL05 control desk
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80mm. Film keypad with six push buttons and six green LEDs.
Installation mounting plate
With variable substructure, measurement X = 80 – 180 mm