Full-height Turnstile Kaba Kentaur FTS-L04

Standard measurements:

Construction:
Portal and housing made of steel. Lockable maintenance openings made of aluminium.

90° rotating unit: Ø 89 mm tubular column each with 11 Ø 40 mm bar-shaped crossbars in glossy AISI 304 stainless steel with black plastic cover caps.

Blocking element with 11 Ø 42 mm crossbars made of steel.

Passage limitation with filled steel rods.

The contractor supplies an auditable static calculation (load: 1.0 kN/m) with foundation information. Manufacturer qualification specifications according to DIN 18800-7.

Connection available for earth strip provided by the customer on both portal posts.

Finish:

– Hot-dip galvanised portal, housing, passage limitation and blocking element.

– Maintenance opening plastic coated in RAL 9006

– Stainless steel glossy rotating unit

Function:

□ Aggregate type 0

The movement of the rotating unit is manual; the rotating unit is (mechanically) freely rotatable in exit direction, the entry direction is blocked. No electronic control takes place.

alternatively

□ Aggregate type 1.1

Movement of the rotating unit is manual; the exit direction is electrically controlled, the entry direction is blocked. A rotary cycle is released by a floating contact of the customer (e.g. ticket reader).

alternatively

□ Aggregate type 1.1

With power supply unit and micro switch, bolt control unit provided by the customer, optionally with relay.

alternatively

□ Aggregate type 1.2

Movement of the rotating unit is manual; the exit direction is electrically controlled, the entry direction is blocked. A rotary cycle is released by a floating contact of the customer (e.g. ticket reader).

alternatively

□ Aggregate type 2

The turnstile is equipped with a 1.6 joule limited low energy SK-M servo positioning drive for automatic access control and active locking. The selected rotation direction is released for one rotary cycle by a floating signal initiated by the customer in the direction of entry or exit. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the turnstile within an adjustable period of time, the release is cancelled. The behaviour of the end point locking in the event of a power failure can be freely selected. Standard setting: blocked in entry direction, free rotation in exit direction.

Personal safety through patented end point locking:

Following a release, the turnstile can be stopped and rotated back at any time up to half way through the rotary motion. This prevents trapping of body parts and carried objects. Once the turnstile has completed half of its rotary motion, the unit can only be exited in the released direction.

MCBF (mean cycles between failure) is 4 million.

Electrical system:

The network-compatible CAN bus control unit is integrated into the unit. Power supply 100–240 VAC 50/60 Hz 253 VA. Four floating inputs for on-site control and five floating outputs for further on-site processing.

Installation:

FFL fixing floor level.

Delivery Time (standard): 15 working days

Delivery Time (with options): 20 working days