Full-height turnstile Kaba Kentaur FTS-L06
Full-height turnstile Kaba Kentaur FTS-L06
Manufacturer: KABA Gallenschutz
Country of origin: Germania
Website: http://www.kaba.com/physical-access-systems/
Poduct code: Kaba FTS-L06
-
Standard measurements:
Portal width:
1500 mm
Passage width:
560 mm
Headroom:
2060 mm
Total height:
2270 mm
Construction:
Rotating unit 90°: Ø 89 mm tubular column each with 11 Ø 40 mm bar-shaped crossbars made of hot-dip galvanised steel with black plastic covering caps.
Passage limitation through steel frame with filled rods, metal housing with front plate for reader installation and reserved space for installations.
The contractor supplies an auditable static calculation (load: 1.0 kN/m) with foundation information. Manufacturer qualification specifications according to DIN 18800-7.
Connection available for earth strip provided by the customer on both portal posts.
Finish:
– Steel, hot-dip galvanised.
– Aluminium parts in RAL 9006.
Function:
□ Aggregate type 1.2
Movement of the rotating unit is manual; the exit direction is electrically controlled, the entry direction is blocked. A rotary cycle is released by a floating contact of the customer (e.g. card reader).
□ Aggregate type 2
The turnstile is equipped with a 1.6 joule limited low energy SK-M servo positioning drive for automatic access control and active locking. The selected rotation direction is released by a floating signal initiated by the customer in the direction of entry or exit. The rotary motion is started by manually pushing the turnstile. The rotating unit is then automatically turned by a motor to the next home position and locks. If no one passes through the turnstile within an adjustable period of time, the release is cancelled. The behaviour of the end point locking in the event of a power failure can be freely selected. Standard setting: blocked in entry direction, free rotation in exit direction.
Personal safety through patented end point locking:
Following a release, the turnstile can be stopped and rotated back at any time up to half way through the rotary motion. This prevents trapping of body parts and carried objects. Once the turnstile has completed half of its rotary motion, the unit can only be exited in the released direction.
MCBF (mean cycles between failure) is 4 million.
Electrical system:
The network-compatible CAN bus control unit is integrated into the unit. Power supply 100–240 VAC 50/60 Hz 253 VA. Four floating inputs for on-site control and five floating outputs for further processing.
Installation:
Floor fixing on finished floor level FFL.
Options
Variants
Passage side inwards right / Passage side inwards left.
Manual unlocking button on enter direction
Roof
(Applies to all roof versions: One continuous roof is supplied for multiple units. Width is adjusted to the total width of the multiple unit.)Fitted on top of the unit to prevent people from climbing over and to protect against weather conditions. Steel substructure hot-dip galvanised, trapezoid plate cover in RAL 9002.
Different dimensions
Finish
Plastic coated finish in RAL
Steel parts and maintenance openings also plastic coated in RAL.LED arrow-cross signal device
Red/green pictogram (Ø 90 mm) installed on both sides in the maintenance opening, intensive luminosity.Heating
Two piece (each 55 W), installed in housing, incl. thermostat, incl. isolation of
the housing for operating within -20°C and -50°C.
Control desk OPL05
For installation in flush-mounted socket with grey single installation frame. Outer dimensions: 80 mm x 80 mm. Film keypad with six push buttons and six green LEDs.
LED lighting
For installation with /without a roof. Depending on a lamp for indoor and outdoor. Luminaire each fastened with housing at Kentaur portal , including weather protection. Voltage: 230 VAC, housing: IP65
Installation
Floor fixing for sub floor level SFL measurement X = 150 mm.
Delivery Time (standard): 15 working days
Delivery Time (with options): 20 working days